{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Avellanador cónico de precisión de MDI con división irregular 90° 16,5 mm
Número de artículo: 150388 16,5
Código del artículo:
- Ángulo de punta del avellanador: 90
- Material de corte: MDI
- División de las cuchillas del avellanador: desigual
- Norma: DIN 335 C
- Mango: Mango cilíndrico con h6
Detalles de producto
Datos técnicos
| ⌀ exterior | 16,5 mm | |
| Recubrimiento | TiAlN | |
| Ángulo de punta del avellanador | 90 grados | |
| Material de corte | MDI | |
| División de las cuchillas del avellanador | desigual | |
| Número de filos Z | 3 | |
| Norma | DIN 335 C | |
| Mango | Mango cilíndrico con h6 | |
| Refrigeración interior | no | |
| ⌀ mínimo de avellanador para perforación a partir de | 3,2 mm | |
| Longitud total L | 60 mm | |
| ⌀ de mango Ds | 10 mm | |
| para tornillos avellanados DIN 7991 | M8 | |
| Avance f en acero < 1100 N/mm 2 | 0,16 mm/rev. | |
| anillo de color | verde | |
| Tipo de producto | Avellanador escalonado y cónico |
Números de identificación y clasificaciones
| Número de artículo | 150388 16,5 | |
| EAN / GTIN | 4045197743794 |
Tablas de Aplicación
N
80
N
80
N
60
P
65
P
60
P
50
P
40
P
10
H
12
M
25
M
20
S
15
K
35
N
70
N
Descripción
Version:
All countersinks have 3 cutting edges. Special geometry with extremely unequal spacing and matching cutting edge preparation. Radially relief ground. Flutes ground from solid. Newly developed special TiAlN coating for long service life.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Advantage:
Very smooth cutting throughout the entire countersinking operation. Chatter-free running for perfect results and optimum tool service life.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces.
Very well suited to virtually all materials. Advantage in comparison to HSS countersinks especially in the field of high-tensile steels and because the working life is several times longer. Shank tolerance h6 - suitable for mounting in hydraulic chucks or shrink-fit chucks.
Very well suited to virtually all materials. Advantage in comparison to HSS countersinks especially in the field of high-tensile steels and because the working life is several times longer. Shank tolerance h6 - suitable for mounting in hydraulic chucks or shrink-fit chucks.