{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Foret long HPC carb. mono., queue cylindrique DIN 6535 HA 30×D 3 mm
Réf.: 123695 3
Référence:
- Type d'outils: Carbure monobloc
- Norme: Norme usine
- Exécution: 30×D
- Tolérance ⌀ nominal: h7
- Nombre de dents Z: 2
Détails du produit
Caractéristiques techniques
| ⌀ nom. DC | 3 mm | |
| Revêtement | TiAlN | |
| Type d'outils | Carbure monobloc | |
| Norme | Norme usine | |
| Exécution | 30×D | |
| Tolérance ⌀ nominal | h7 | |
| Nombre de dents Z | 2 | |
| Angle de pointe | 135 degré | |
| Profondeur de perçage maximale recommandée L2 | 100,5 mm | |
| Queue | DIN 6535 HA avec h6 | |
| Arrosage interne | Oui, à 40 bars | |
| Méthode d'usinage | HPC | |
| Foret pilote nécessaire | Oui, foret pilote | |
| Longueur des goujures Lc | 105 mm | |
| Longueur totale L | 150 mm | |
| ⌀ queue Ds | 6 mm | |
| Avance f dans l'acier < 900 N/mm2 | 0,06 mm/tr | |
| Bague de couleur | Vert | |
| Type de produit | Forets hélicoïdaux |
Numéros d’identification et classifications
| Référence article | 123695 3 | |
| EAN / GTIN | 4045197320438 |
Tableau d’application
P
90
P
75
P
75
P
75
P
60
M
45
M
40
K
80
Description
Version:
Spiral fluted, with 4 guide chamfers and internal cooling channels. New generation of high performance deep hole drills in the HPC range.
With 135° point angle and special h7 cutting edge tolerance for optimum generation of a deep hole.
High roundness and alignment accuracy of the deep hole.
With 135° point angle and special h7 cutting edge tolerance for optimum generation of a deep hole.
High roundness and alignment accuracy of the deep hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For process reliability when using the 16×D deep hole drill, an initial centre drilling with No. 121068 – 121121 or 4×D pilot drilling operation with pilot drill No. 122736 is necessary. For deep holes greater than 20×D, a pilot hole to the maximum drilling depth with pilot drill No. 122736 is absolutely essential. The generation of a pilot hole improves process reliability. See also pages 140/141.
For process reliability when using the 16×D deep hole drill, an initial centre drilling with No. 121068 – 121121 or 4×D pilot drilling operation with pilot drill No. 122736 is necessary. For deep holes greater than 20×D, a pilot hole to the maximum drilling depth with pilot drill No. 122736 is absolutely essential. The generation of a pilot hole improves process reliability. See also pages 140/141.