{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Alésoir conique 1:50 12 mm
Réf.: 161200 12
Référence:
- Tool material: HSS
- Standard: DIN 9
- Taper ratio: 1:50
- Through-coolant: no
- Application for type of drilling: for through holes
Détails du produit
Caractéristiques techniques
| small ⌀ D3 | 11.8 mm | |
| large ⌀ D2 | 16 mm | |
| Nominal ⌀ DC | 12 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 9 | |
| Taper ratio | 1:50 | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 210 mm | |
| Overall length L | 255 mm | |
| Shank square □ | 11.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Numéros d’identification et classifications
| Référence article | 161200 12 | |
| EAN / GTIN | 4045197088956 |
Tableau d’application
N
P
P
P
Description
Version:
Conically increasing cutting edges (1 mm over 50 mm length).
Size1.2 − 2.5 − straight flutes. Form A.
Size3 − 25 − helical flutes. Form B.
Size1.2 − 2.5 − straight flutes. Form A.
Size3 − 25 − helical flutes. Form B.
Application:
For reaming tapered holes by hand for taper pins to ISO 2339 (DIN 1), DIN 258, 1447, ISO 8736, 8737 (DIN 7977, 7978).
Recommendation:
The pre-drilled hole is best produced using a straight shank taper pin drill No. 116310.