{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
VHM-HPC-boor cilindrische schacht DIN 6535 HA 12,9
Artikelnummer: 122659 12,9
Klantartikelnummer:
- Snijmateriaal: VHM
- Norm: DIN 6537
- Uitvoering: 6×D
- Tolerantie nominale ⌀: m6
- Aantal snijkanten Z: 2
Productdetails
Technische gegevens
| Nominale ⌀ DC | 12,9 mm | |
| Coating | TiAlN | |
| Snijmateriaal | VHM | |
| Norm | DIN 6537 | |
| Uitvoering | 6×D | |
| Tolerantie nominale ⌀ | m6 | |
| Aantal snijkanten Z | 2 | |
| Tophoek | 140 graden | |
| aanbevolen maximale boordiepte L2 | 57,7 mm | |
| Schacht | DIN 6535 HA met h6 | |
| Inwendige koeling | ja, met 25 bar | |
| Verspaningsstrategie | HPC | |
| Semi-standaard | ja | |
| Spaangroeflengte Lc | 77 mm | |
| Totale lengte L | 124 mm | |
| Schacht-⌀ Ds | 14 mm | |
| Schachttolerantie | h6 | |
| Voeding f in RVS > 900 N/mm2 | 0,2 mm/omw. | |
| Gekleurde ring | blauw | |
| Producttype | Spiraalboor |
Identificatienummers en classificaties
| Artikelnummer | 122659 12,9 | |
| EAN/GTIN | 4045197582942 |
Toepassingstabel
P
170
P
140
P
130
P
110
P
70
M
90
M
80
K
95
Omschrijving
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Attention:
Sizes ending with X = cutter ⌀ tolerance h7.