{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Elektroninis dinamometrinis raktas 30 Nm
Artikelnummer: 655345 30
Klantartikelnummer:
Korting
Klik om de afbeelding te vergroten
Klik om de afbeelding te vergroten
Klik om de afbeelding te vergroten
Praktinis pavyzdysSpecialūs priedai: Coin-Driver Nr. 66 4310 / 66 4311, nekenksmingam kamščių išsukimui.
Klik om de afbeelding te vergroten
Legendos aprašymą žr. aprašymo tekste.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±2; ±3
- Exchangeable tool: Įstatomas įrankis
- Test certificate: Manufacturer’s test certificate
Productdetails
Technische gegevens
| maximum torque | 30 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±2 %; ±3 % | |
| Exchangeable tool | Įstatomas įrankis | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 390 mm | |
| Torque range | 6 Nm - 30 Nm | |
| Resolution | 0.01 Nm | |
| Weight | 1,400 g | |
| Adjusted reference dimension on the torque wrench [l2] | 17.5 mm | |
| Square drive | 1/4 in | |
| Socket for plug-in head | 9×12 mm | |
| Display | digital | |
| Release signalling | optinis; akustinis | |
| Trigger principle | mechanical short-travel release | |
| Power supply | Battery-powered | |
| Number of batteries contained | 1 | |
| Battery type | LR3 | |
| Connection format | for plug-in heads (rectangular socket) | |
| Measurement technology | electronic | |
| Data can be recorded | yes | |
| Setting the trigger value | digital, adjustable | |
| Feedback | displaying | |
| Reversible reading | Nm; lbfft; lbfin; kgfm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length without plug-in head [l1] | 299.2 mm | |
| Lever length including factory calibration reference dimension [l3] | 316.7 mm | |
| Produkto rūšis | Dinamometrinis raktas |
Identificatienummers en classificaties
| Artikelnummer | 655345 30 | |
| EAN/GTIN | 4045197503824 |
Omschrijving
Version:
Units of measure: Nm, lbfft, lbfin, kgfm.
Robust torque wrench with impact resistant casing, 2-component handle, large display and reversible ratchet. Easy operation using large input buttons. Visual and acoustic signal indicates achievement of the set torque visually and audibly. Two working modes; selectable between peak value display and following display. The working memory can store up to 50 torque settings.
Robust torque wrench with impact resistant casing, 2-component handle, large display and reversible ratchet. Easy operation using large input buttons. Visual and acoustic signal indicates achievement of the set torque visually and audibly. Two working modes; selectable between peak value display and following display. The working memory can store up to 50 torque settings.
Sturdy plug-in ratchet with change-over wheel.
Application:
Torque control; controlled tightening of screws in a single operation or for small batch production.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.