{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Alternative article:
-
Article no.: 972015 1000
eLevel+ workstation with ESD coating 1000 mm
Article no.: 927105 1000
Article code:
Click to enlarge image
Click to enlarge image
eLevel+ levels only the worktop - the remainder of the workstation remains unchanged.
Click to enlarge image
Rear panel with integral cable duct.
Click to enlarge image
Control panel with memory function, 3 different working heights can be programmed.
Click to enlarge image
- Design version: Steel hollow section construction
- Workbench/desk load capacity - maximum distributed load (on wood): 250
- Type of height adjustment: electrical
- Insert thickness: 40
- Height adjustment: 25
Find similar products here:
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Height adjustment workstation | 700-1000 mm | |
| Workbench/desk load capacity - maximum distributed load (on wood) | 250 kg | |
| Type of height adjustment | electrical | |
| Insert thickness | 40 mm | |
| Height adjustment | 25 mm | |
| electrostatic characteristic | EGB/ESD | |
| Series | Workstation | |
| Height adjustment range (worktop surface) from − to | 700 mm - 1,000 mm | |
| Width | 1,000 mm | |
| Depth | 800 mm | |
| Worktop length | 1,000 mm | |
| Worktop depth | 700 mm | |
| Worktop thickness | 40 mm | |
| Principle of height adjustment | only the worktop | |
| Stepless height adjustment | yes | |
| Material of worktop | Chipboard, volume conductive | |
| Worktop covering | HPL plastic, conductive | |
| Coating thickness | 0.8 mm | |
| Colour of worktop surface | light grey RAL 7035 | |
| Control panel with display and memory functions | yes | |
| Weight | 78 kg | |
| Type of product | Work table |
Identification numbers & Classifications
| Article number | 927105 1000 |
Description
Version:
eLevel+ workstation, ESD conductive according to DIN EN 61340-5-1 − with stepless electrical height adjustment. Height adjustment via an electronic control panel. Control panel with display and memory function. Push-button adjustment for a suitable worktop height. All-round 3 mm antistatic ABS edge band. Central grounding point underneath the ESD worktop.
Note:
All plastic components (e.g. covering caps) are not ESD conductive.
- If using casings attached to the underside of the worktop, note that such casings may not exceed a maximum height of 540 mm.
- Caution: when installing benches in a row, please use side plates No. 927109 (crush hazard).