{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Tapping chuck type DSPL with shank, Type: 12
Article no.: 334510 12
Article code:
Product details
Technical Data
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Interface position | on the machine | |
| Holder type | morse taper MT | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 2 | |
| Type of mounting | spigot | |
| Interface on machine side | MT 2 | |
| Length compensation by compression | 10 mm | |
| Pendular compensation | yes | |
| Suitable for tapping | yes | |
| Minimum tap size | M3 | |
| Maximum tap size | M12 | |
| Interface | joint 1 | |
| Type of product | quick-change chuck | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 334510 12 | |
| EAN / GTIN | 2050001921062 | |
| Manufacturer number | 6707468 | |
| Manufacturer/responsible person | Bilz Werkzeugfabrik GmbH & Co. KG, Vogelsangstraße 8, 73760 Ostfildern, Germany, www.bilz.de |
Description
Version:
- Double clamping is achieved by 3 jaws which centre the tap shank and by 4 additional jaws which clamp the tap square drive.
- When set correctly, the safety clutch prevents tap breakage.
- Blind hole threads can be tapped down to the bottom.
- The self-adjustment mechanism compensates for misalignment errors between the machine spindle and the component.
- The flexible length compensation is effective on compression and tension. It prevents the thread being cut incorrectly with manual or power feed.
Application:
For tapping internal threads on reversible drilling machines, turret lathes. Applicable horizontally and vertically for right-handed threads.
Supplied with:
1 chuck key.