Support leg including manual height adjustment
Article no.: 927001
- Design version: Steel hollow section construction
- Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Description
Version:
Height adjustment 150 mm.
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Supplied with:
Support leg with manual height adjustment No. 927080 size 150.
Colour:
Light grey RAL 7035, powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening.
The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
