Hoffmann Group Home
  • 500.000 listed articles
  • Highest delivery accuracy
  • TÜV certified quality of delivery
  • Menu
Item no.: 122725 10,1

Master Steel FEED solid carbide drill, plain shank DIN 6535 HA 10,1 mm or inch

Brand: GARANT
Tool material solid carbide
Through-coolant yes, with 25 bar
Point angle 145
Skaft DIN 6535 HA to h6
Machining strategy HPC
Drill depth up to 6×D
Number of cutting edges Z 3
Tolerance nominal ⌀ h7
Norm DIN 6537
No price available

Master Steel FEED solid carbide drill, plain shank DIN 6535 HA 10,1 ...

In stock
More from the category Solid carbide drills
More about GARANT

Description

Version:

3-flute drill, specially developed for use at very high feed rates. Outstandingly suitable for machines with high installed power and stable operating conditions.
  • Special cutter geometry with stable cutting edges and large clearance at the centre enables very high feed rates.
  • The patented tip is optimised for chip flow and generates low cutting pressure with good chip breakage.
  • With 145° tip angle for low burr formation when drilling through holes.

The sector-leading technology of the chisel edge guarantees optimum self-centring behaviour and permits spot drilling on irregular surfaces. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.

Recommendation:

Maximum drilling depth:
flute length (see table) less 1.5×nominal ⌀.

Note:

Form HB and HE supplied at the same price as HA.
Form HB: order with No. 122726.
Form HE: order with No. 122725 + 129100HE.

Technical Data

Drill depth up to
6×D 
Skaft
DIN 6535 HA to h6 
Coating
TiAlN 
Tool material
solid carbide 
Through-coolant
yes, with 25 bar 
Machining strategy
HPC 
Colour ring
green 
Point angle
145 degrees
Series
Master Steel 

Application Table

Steel < 500 N/mm²
P
160
Steel < 750 N/mm²
P
140
Steel < 900 N/mm²
P
130
Steel < 1100 N/mm²
P
110
Steel < 1400 N/mm²
P
90
Steel < 55 HRC
H
60
INOX < 900 N/mm²
M
60
INOX > 900 N/mm²
M
50
Ti > 850 N/mm²
S
40
GG
K
130
GGG
K
80
Uni
 
wet maximum
 
wet minimum