Article no.: 231610

HiPer-Drill base body 5×D

Brand: GARANT
Drill depth up to 5×D
Skaft ISO 9766
Through-coolant yes
Use for drilling limited drilling through a stack
Use for drilling limited cross-drilling
Use for drilling limited drilling with oblique exit
Use for drilling limited oblique spot drilling

HiPer-Drill base body 5×D

Unit price
from  $ 306.77
plus VAT at the current rate Prices plus delivery costs

Description

Version:

  • Very high feed rates and maximum performance due to optimally matched geometries and materials.
  • Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
  • High concentricity when assembled.
  • Shank support for optimum stability in operation.

Application:

For stationary and rotating use. For holes up to IT9 accuracy.

Note:

The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.

Technical Data

Drill depth up to
5×D
Skaft
ISO 9766
Use for drilling
limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
Through-coolant
yes
loading spinner image
loading spinner image