GARANT Master Steel SlotMachine solid carbide roughing end mill HPC TiAlN
Article no.: 205550
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: NR
- Spacing of the cutters: unequal spacing
- Cutting width ae for milling operation: Full slot cutting depth 1×D; 0.5×D for side milling
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core. Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining, particularly suitable for full-slot machining.