{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Electronic torque wrench with digital dial gauge display
Article no.: 655550
Article code:
Click to enlarge image
Reversible ratchet with ejector.Display with battery charge display.One button for On / reset.Mini-USB port for charging.Ergonomically shaped handle.
Click to enlarge image
The current torque (track) is displayed by the pointer and as a numerical value.
Click to enlarge image
Uncalibrated range: Without scale input. The numeric value is shown in red.
Click to enlarge image
Optional accessories: Coin driver No. 664310 / 664311, for unscrewing without damage, for extracting blanking plugs.
Click to enlarge image
Optional accessories: Coin driver No. 664310 / 664311, for unscrewing without damage, for extracting blanking plugs.
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
Description
Version:
High-precision, electronic torque wrench with digital dial gauge display. Body of steel, satin chrome-plated, integral reversible ratchet with ejector. Digital display of the Nm value and battery charge status. A control switch for switching on and reset, automatic switch-off after 2 minutes.
Units of measure: Nm, lbfft.
Units of measure: Nm, lbfft.
- Reversible ratchet with ejector.
- Display with battery charge display.
- One button for On / reset.
- Mini-USB port for charging.
- Ergonomically shaped handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held to be read later.
Display: Peak and Track function modes.
Display: Peak and Track function modes.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise ± 2 %, anticlockwise ± 3 %.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Supplied with:
Mini-USB charger cable for the TFT display. Supplied in a sturdy plastic case
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.