Torque screwdrivers with digital display, to take interchangeable blades
Article no.:
659911
Description
Version:
To take interchangeable blades (8 mm No. 659870 − 659884 and 6 mm No. 659920 − 659928).
The desired torque for sizes 80, 250 and 500 is set using a 3 AF hexagon screwdriver, and 4 AF for size1600. The torque setting is displayed in a window (digital display at the end of the handle). Activation of the digital display by pressing with a finger (pressure sensor). The automatic cut-out after approx. 20 seconds enables a battery life of more than 10years. The battery can be changed at the factory or during recalibration. Display changeover between Nm and lbf. ft.
To take interchangeable blades (8 mm No. 659870 − 659884 and 6 mm No. 659920 − 659928).
The desired torque for sizes 80, 250 and 500 is set using a 3 AF hexagon screwdriver, and 4 AF for size1600. The torque setting is displayed in a window (digital display at the end of the handle). Activation of the digital display by pressing with a finger (pressure sensor). The automatic cut-out after approx. 20 seconds enables a battery life of more than 10years. The battery can be changed at the factory or during recalibration. Display changeover between Nm and lbf. ft.
To take interchangeable blades (8 mm No. 659870 − 659884 and 6 mm No. 659920 − 659928).
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.