{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Torque screwdriver with digital display, to take interchangeable blades 200 cNm
Article no.: 659912 200
Article code:
Product details
Technical Data
| Manufacturer's designation | DigiTorque V2 | |
| maximum torque | 200 cNm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 126 mm | |
| Torque range | 40 cNm - 200 cNm | |
| Torque range | 0.4 Nm - 2 Nm | |
| Resolution | 2 cNm | |
| suitable interchangeable blades | 6 mm | |
| Display | digital | |
| Release signalling | akustisk; haptisk | |
| Trigger principle | mechanical slip clutch | |
| Connection format | exchangeable blade | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | digital, adjustable | |
| Feedback | triggering | |
| Reversible reading | cNm; lbfin | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Weight | 97 g | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659912 200 | |
| EAN / GTIN | 7610733276233 | |
| Manufacturer number | 9320.A 40-200 cNm |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft.
Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft.
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.