{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Four-pin crimping tool DigiCrimp, 2-component grips 6,0
Article no.: 729530 6,0
Article code:
Product details
Technical Data
| Manufacturer's designation | DigiCrimp | |
| for conductor cross-section | 0.14 mm2 - 6 mm2 | |
| overall length | 230 mm | |
| Positive barrier available | yes | |
| digital display | yes | |
| Type of product | Crimping tool |
Identification numbers & Classifications
| Article number | 729530 6,0 | |
| EAN / GTIN | 4049002057687 | |
| Manufacturer number | R8756 0000 61 |
Description
Version:
Reliable crimping due to positive barrier and synchronised advance of the crimping pins.
Crimp mandrel advance can be adjusted in steps of 0.01 mm and read digitally (setting in mm and inch). Use the check pin supplied to check the basic setting. With recalibration function. Electronic wear monitoring with warning function. Setting function can be called up. Can be used with Rennsteig and MIL positioners.
Crimp mandrel advance can be adjusted in steps of 0.01 mm and read digitally (setting in mm and inch). Use the check pin supplied to check the basic setting. With recalibration function. Electronic wear monitoring with warning function. Setting function can be called up. Can be used with Rennsteig and MIL positioners.
Application:
For turned pin and socket contacts with crimp geometry similar to MIL.
Supplied with:
Four-pin crimp tool in a case.