{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Abrasive flap disc V2 power, (SiC), flat-dished for aluminium 40
Article no.: 565486 40
Article code:
Click to enlarge image
Click to enlarge image
More than 70 % of the abrasive material lies in the outer area of the disc.
Click to enlarge image
- Grinding medium code: SiC
- Iron, sulphur and chlorine constituents: < 0.1
- optimised for material: Aluminium; fibre-reinforced plastics
- maximum circumferential speed: 80
Find similar products here:
Product details
Technical Data
| Grinding medium code | SiC | |
| Grit | 40 | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Shape description | flat-dished | |
| Disc ⌀ | 125 mm | |
| Bore ⌀ | 22.23 mm | |
| Backing pad | Glass fibre pad | |
| optimised for material | Aluminium; fibre-reinforced plastics | |
| maximum circumferential speed | 80 m/s | |
| Type of product | Abrasive flap disc |
Identification numbers & Classifications
| Article number | 565486 40 | |
| Manufacturer number | A27441250401434 |
Application Table
Description
Version:
The patented sickle-shaped strip-form and configuration permit a high coating density for an exceptional metal removal rate and a long tool life. High-quality mounting on a steel or glass fibre pad for low-vibration working at reduced noise levels.
ZA: Pure Zirconium Aluminium Oxide on a polyester-cotton mixed fabric. Very aggressive due to the open grit distribution.
ZA-Power: Special Zirconium Aluminium Oxide mixture with active coating. Cool cut, with no glazing or clogging.
CER: Very high abrasion performance, ceramic grit with self-sharpening effect. No glazing or overheating. Highly suitable even for edge grinding.
SiC: Particularly coarse Silicon Carbide grit, does not clog. Highly suitable for aluminium and fibre-reinforced composite materials.
SiC: Particularly coarse Silicon Carbide grit, does not clog. Highly suitable for aluminium and fibre-reinforced composite materials.
ZA: Pure Zirconium Aluminium Oxide on a polyester-cotton mixed fabric. Very aggressive due to the open grit distribution.
ZA-Power: Special Zirconium Aluminium Oxide mixture with active coating. Cool cut, with no glazing or clogging.
CER: Very high abrasion performance, ceramic grit with self-sharpening effect. No glazing or overheating. Highly suitable even for edge grinding.
SiC: Particularly coarse Silicon Carbide grit, does not clog. Highly suitable for aluminium and fibre-reinforced composite materials.
SiC: Particularly coarse Silicon Carbide grit, does not clog. Highly suitable for aluminium and fibre-reinforced composite materials.
Application:
For general applications. Low-vibration working and long working life.
Note:
Padless flap discs SLTflex for gentle cutting, fillet weld smoothing etc. can be found under No. 566300 ff.