Pull stud Hurco 90° with fit sealed 40
Add to shopping list
Share product
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also DIN 69871 / ISO 7388-1.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Technical Data
suitable for steep tapers | 40 |
Pull stud standard | MAS 403 |
Collar ⌀ D | 23 mm |
Head ⌀ D1 | 15 mm |
Overall length L | 57.15 mm |
L1 | 32 mm |
Thread M | M16 |
maximum tightening torque | 50 Nm |
suitable for taper arbors with colour code | SK 40 |
Width across flats | 19 mm |
Type of product | Pull Stud |
Article number | 308806 40 |
EAN / GTIN | 4045197644640 |