{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Four-jaw lathe chuck steel with short taper mount DIN 702-3
Article no.: 312705
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Short taper mount to DIN 702-3 (stud and collar nut).
Click to enlarge image
Description
Version:
Drop-forged, resulting in a long working life and suitability for high speed machines.
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- Weight-reduced body of steel.
- High concentricity.
Application:
For spindle noses DIN 55027 with studs and collar nuts. The chuck is always fitted to the spindle nose directly without an intermediate flange.
Standard:
DIN 702-3.
Material:
Steel
Supplied with:
1 set = 4 hardened inside jaws, stepped on the outside.
1 set = 4 hardened outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set = 4 hardened outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
Optional extras:
Note:
DIN 702-3 satisfies the old standard DIN 55027.