{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Steel conduit tap PG21
Article no.: 133450 PG21
Article code:
- Thread type: Pg
- Flank angle: 80
- Tool material: HSS
- Standard: DIN 40432
- Thread standard: DIN 40430
Product details
Technical Data
| Thread size | Pg21 | |
| Coating | uncoated | |
| Thread type | Pg | |
| Flank angle | 80 degrees | |
| Tool material | HSS | |
| Standard | DIN 40432 | |
| Thread standard | DIN 40430 | |
| Taper lead form | D | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for blind holes; up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.59 mm | |
| Threads per inch | 16 | |
| Thread ⌀ | 28.3 mm | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank square □ | 16 mm | |
| Tapping hole ⌀ | 27 mm | |
| Type of threading tool | Machine tap for conventional machining | |
| Number of clamping slots | 4 | |
| Colour ring | without | |
| Number of cutting edges Z | 4 | |
| recommended maximum drilling depth L2 | 84.9 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 133450 PG21 | |
| EAN / GTIN | 4045197074959 |
Application Table
N
13
P
15
P
15
M
6
N
13
Description
Application:
For use as machine tap or for cleaning existing threads by hand.
For steel conduit threads DIN 40430.
For steel conduit threads DIN 40430.
Note:
Shank produced according to DIN 40432.