Article no.: 206260 5/1,0

Solid carbide torus cutter HPC 5/1,0 mm

    • No price available
on request
In stock
35 pieces in stock
Brand: GARANT
Tool material: Solid carbide
Standard: Manufacturer’s standard
Type: W
Tolerance nominal ⌀: f8
No. of teeth Z: 3
Helix angle: 45 °
Helix angle characteristic: unequal spacing
Spacing of the cutters: unequal spacing
Direction of infeed: horizontal, oblique and vertical
Cutting width a<sub>e</sub> for milling operation: 0.3×D for side milling
Cutting width a<sub>e</sub> for milling operation: 0.03×D for copy milling
Shank: DIN 6535 HA to h6
Balance quality with shank: G 2.5 with HA
Machining strategy: HPC

Information

  • Tool material: Solid carbide
  • Standard: Manufacturer’s standard
  • Type: W
  • Tolerance nominal ⌀: f8
  • No. of teeth Z: 3

Technical Data

Cutting edge ⌀ DC 5 mm
Coating ZOX
Tool material Solid carbide
Standard Manufacturer’s standard
Type W
Tolerance nominal ⌀ f8
No. of teeth Z 3
Helix angle 45 °
Helix angle characteristic unequal spacing
Spacing of the cutters unequal spacing
Direction of infeed horizontal, oblique and vertical
Cutting width ae for milling operation 0.3×D for side milling; 0.03×D for copy milling
Shank DIN 6535 HA to h6
Balance quality with shank G 2.5 with HA
Through-coolant no
Machining strategy HPC
Flute length Lc 13 mm
Corner radius R1 1 mm
Overhang length L1 incl. recess 18 mm
Recess ⌀ D1 4.7 mm
Overall length L 57 mm
Shank ⌀ Ds 6 mm
Feed fz for side milling in short-chipping aluminium 0.03 mm
Feed fz for copy milling in short-chipping aluminium 0.03 mm
Shank tolerance h6
Colour ring yellow
Type of product Torus cutter
Article number 206260 5/1,0
EAN / GTIN 4045197300867

Description

Version:

With strong core, special chip breaker recesses and large polished flutes.
New generation of high performance end mills in the HPC machining range.

Application:

Especially for high speed machining in mould and tool making for copy milling.

Note:

NEW GENERATION AVAILABLE! Recommended successor product is No. 206255.

Application Table

Aluminium
N
500
Aluminium (short chipping)
N
480
Alu > 10% Si
N
240
Cu
N
200
CuZn
N
240
wet maximum
 
wet minimum
 
dry
 
Air
 

Create new article code

Change article code

By means of article codes you can record your internal item numbers in the eShop.

Forms

If you see this, something went wrong, or you disabled javascript

Flyers

If you see this, something went wrong, or you disabled javascript

Promotions

If you see this, something went wrong, or you disabled javascript

Instructions

If you see this, something went wrong, or you disabled javascript

Share this product

or copy this link

Add to shopping list

Select article variation and quantity

⌀ f8 DC / R1 (mm) Unit price incl. VAT
To shopping cart