{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
GARANT Diabolo solid carbide milling cutter HPC 14 mm
Article no.: 203211 14
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: H
- Tolerance nominal ⌀: e8
- No. of teeth Z: 6
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 14 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | H | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 6 | |
| Helix angle | 50 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 30 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 14 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 65 HRC | 0.025 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203211 14 | |
| EAN / GTIN | 4045197597441 |
Application Table
P
170
H
170
H
170
H
145
H
100
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide, specially for hard machining.
Dimensions similar to DIN 6527.
Special geometry, coating and carbide, specially for hard machining.
Dimensions similar to DIN 6527.
Application:
For profile milling as finishing.
(Plunge cutting only to shallow depths).
(Plunge cutting only to shallow depths).