{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
High-precision countersink with unequal spacing and 3 drive flats 90° AlTiCN
Article no.: 150393
Article code:
- Countersink tip angle: 90
- Tool material: HSS E
- Spacing of the countersink cutting edges: unequal spacing
- Standard: DIN 335 C
- Shank: Shank with h9 and three drive flats
Description
Version:
All countersinks have 3 cutting edges, radially relieved.
Flutes are ground from solid.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Special geometry with unequal spacing and matching cutting edge preparation.
Newly developed AlTiCN coating especially for stainless steels.
Three drive flats on the shank for use in a 3-jaw chuck.
Flutes are ground from solid.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Special geometry with unequal spacing and matching cutting edge preparation.
Newly developed AlTiCN coating especially for stainless steels.
Three drive flats on the shank for use in a 3-jaw chuck.
Application:
High-precision countersinks for chatter-free production of precise, round 90° countersunk surfaces.