Article no.: 212170 32/2
Copy mill 0° negative 32/2 mm
No price available
Brand:
GARANT
Information
- Milling head suitable for insert shape: round
- Milling application: Circular milling
- Milling application: Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Spare parts
- Compatible inserts
- Data sheet
- Flip Catalogue
- No additional information or downloads available
Technical Data
| Cutting edge ⌀ DC | 32 mm |
| Number of cutting edges Z | 2 |
| Shank type | with threaded shank |
| Milling head suitable for insert shape | round |
| Milling application | Circular milling; Ramping |
| Spacing of the cutters | unequal spacing |
| Through-coolant | yes |
| Tool exchange | PowerCard |
| ⌀ D1 h6 | 17 mm |
| ⌀ D2 | 28.7 mm |
| ⌀ D3 | 16 mm |
| Overall length Ltot | 42 mm |
| Mounting thread M | M16 |
| Circular interpolation milling ⌀ Dmin | 48 mm |
| Circular interpolation milling ⌀ Dmax | 62 mm |
| Circular interpolation milling ap | 5 mm |
| Ramping angle αmax | 5.37 ° |
| Ramping length L for αmax | 11.97 mm |
| suitable indexable insert | RD..1604 |
| Pack of insert screws | 219800 (20IP; 5.7 Nm) |
| Set of retaining washers | 219955 |
| Article number | 212170 32/2 |
| EAN / GTIN | 4045197192936 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Application:
With pack of insert screws No. 219800 - for securing indexable inserts and retaining washers.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.