{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Rigid foam holder
Article no.: 956820
Article code:
Click to enlarge image
Click to enlarge image
Application example size 1 and size 3 on perforated panel.
Click to enlarge image
Click to enlarge image
Application example
Description
Version:
Rigid foam holder of sheet metal to take rigid foam inlays of 20G / 500 mm width. With facility for an additional central restraint to secure two foam inlays. Each holder can take 2 rigid foam inlays of size 8×20G or 4 foam inlays of size 8×10G.
Suitable for:
For hanging up in perforated panels □ 9×9 mm in 37 mm grid.
Can also be attached to the worktop with 4 wood screws (not included).
Can also be attached to the worktop with 4 wood screws (not included).
Colour:
Rigid foam holder RAL 7035 light grey, additional holder RAL 7016 anthracite, powder-coated.
Note:
Suitable only for foam inlays in which the tools lie virtually flush.
Only limited suitability for the foam inlays listed in the catalogue. Tools must be planned for a close fit in an individually configured foam inlay.
Only limited suitability for the foam inlays listed in the catalogue. Tools must be planned for a close fit in an individually configured foam inlay.