{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill indexable drill Combination shank 19 mm
Article no.: 234015 19
Artikkelkode:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Produktinformasjon
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 19 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 95 mm | |
| for inch ⌀ | 3/4 inch | |
| Overhang LA | 113 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank length Ls | 56 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 060305 | |
| Pack of insert screws | 239700 6IP2 (0.6 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Artikkelkode | 234015 19 | |
| EAN / GTIN | 4045197697097 |
Beskrivelse
Prevedenie:
Chladiace kanály umiestnené v skrutkovici vrtáka zabezpečujú maximálnu stabilitu, pretože jadro vrtáka nie je oslabené.
Tolerancia otvorov: −0,1 / +0,35 mm
Tolerancia otvorov: −0,1 / +0,35 mm
Popis:
Pre najvyšší výkon a presnosť rozmerov. Aj na náročné situácie pri vŕtaní do 5×D.
Použitie:
Vhodné pro:
Vyměnitelné destičky SOGX 060305.
Odporúčanie:
Pri vŕtaní znížte rýchlosť posuvu na 70 %.
Poznámka:
Ďalšie medzirozmery v rozmeroch 1/10 sú k dispozícii na vyžiadanie.