{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Manual test stand FMT-220 with handwheel 2500-250
Article no.: 478996 2500-250
Article code:
Product details
Technical Data
| maximum application range | 2,500 N | |
| Feed rate (maximum stroke) | 120 mm | |
| Feed rate (per revolution) | 1 mm | |
| Inspection room height | 250 mm | |
| Inspection room depth | 120 mm | |
| Connection of clamping tools | M6 | |
| Power supply | Mains operated | |
| Length | 280 mm | |
| Width | 200 mm | |
| Height | 560 mm | |
| Type of product | Test stand |
Identification numbers & Classifications
| Article number | 478996 2500-250 | |
| EAN / GTIN | 4260244680963 | |
| Manufacturer number | FMT-220.00K2 |
Description
Version:
- Robust aluminium/stainless steel design can accept loading up to 2500 N, with additional guide rail.
- Perfect guidance for compressive and tensile force measurement, thanks to the additional linear unit.
- Precise positioning by means of a height-adjustable spindle lift gearbox with handwheel.
- Bench top with attachment facilities for clamps or slotted plates.
- Very flexible mounting plate for digital draw bar pulling force gauges.
- Side handwheel can be replaced by a motor unit.
Application:
For simple non-speed-dependent tests on materials and components in quality assurance and production.
Supplied with:
Vertical test stand with handwheel drive, including attachment points for force measurement devices and operating instructions (force measurement devices must be ordered separately).