Version:
GARANT Diabolo:Special geometry, coating and carbide
for hard machining in the high-performance field. Suitable even for
machining electrolytic copper.Recess angle α = 16°.
Extra-sturdy shank for achieving longer tool life.
Tolerances:
- Corner radius: Radius contour = 0 / -0.005 mm.
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
values for:
copying: ap = 0.05×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z