{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Surface roughness measuring instrument, without printer M410
Article no.: 499042 M410
Article code:
Click to enlarge image
Example: Feed unit evaluation device removed, without printer
Click to enlarge image
Carrying case
Click to enlarge image
Illustration shows the edge finder without probe guard
- Reversible reading: mm / inch
- Interface: USB interface; Bluetooth interface
Product details
Technical Data
| Reversible reading | mm / inch | |
| Interface | USB interface; Bluetooth interface | |
| Roughness standards | DIN / ISO / JIS / ASME, MOTIF | |
| Measurement travel for longitudinal sensing | 26 mm | |
| Cut-off (λc) | 0.08; 0.25; 0.80; 2.50 mm | |
| Cut-off (λc) | 0.003; 0.010; 0.032; 0.100 in | |
| Scanning speed | 0.1 – 1.0 mm/s | |
| Feed unit length | 194 mm | |
| Feed unit width | 38 mm | |
| Feed unit height | 72 mm | |
| Evaluation unit length | 162 mm | |
| Evaluation unit width | 77 mm | |
| Evaluation unit height | 35 mm | |
| Weight feed unit | 1.1 kg | |
| Weight of the evaluation unit | 0.3 kg | |
| Type of product | Surface roughness measuring device |
Identification numbers & Classifications
| Article number | 499042 M410 | |
| EAN / GTIN | 4059192073473 |
Description
Version:
Surface roughness measuring tool with free probe travel and automatic zeroing for precise roughness and wave measurement in accordance with relevant standards. The MarSurf M 410 has a practical touch display, an evaluation device can be removed from the feed unit, an integrated PDF memory and data transmission via Bluetooth is possible.
- Free probe travel with high-precision probe system.
- Quick-change probe arm without tools and with additional protection.
- PDF protocol creation directly in the device without additional software.
- Only a few seconds of set-up time using motorised height adjustment of the feed unit with automatic zeroing.
- Unique probe arm management for creating, changing and deleting over 50 probe arms. The calibration data of a calibrated probe arm is retained.
- Probe travel in accordance with DIN EN ISO 4288 / ASME B46.
- Automatic selection of filters and probe travels to the standard.
- Measurement travel for longitudinal sensing 0.1 to 26 mm.
- Phase correction Gauss filter to DIN EN ISO 16610-21 (supersedes DIN EN ISO 11562), robust Gauss filter according to DIN EN ISO 16610-31 and special filter ISO 13565-1.
- Wireless data transmission via Bluetooth to a PC, e.g. to Excel or to third-party software.
- Assistance-guided tilt adjustment.
- Portable use with mains and battery power.
- International up to date incorporating all the usual reference values to DIN/ISO, JIS, ASME, MOTIF.
- 17 languages integrated.
- Inclination correction ±1°, manually.
- Storage of over 30,000 measurement programs.
- Scan information via scanner by scanning a QR or barcode (scanner not included).
Supplied with:
MarSurf M 410 evaluation device, MarSurf MD 26 feed unit including BFW 250 probe system, standard probe arm, M 410 docking station, wide-range power supply unit with 3 adapters, micro USB cable, MD 26 cover cap, screwdrivers, 3 pcs. assembly key, operating instructions and carrying case.
Note:
Other probe arms, e.g. for small bores and slots, available on request.