{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
GARANT Master TM plain shank thread mill G1/8
Article no.: 139705 G1/8
Article code:
- Thread type: G; G-LH
- Flank angle: 55
- Tool material: Solid carbide
- Shank: DIN 6535 HA to h6
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master TM | |
| Thread size | G1/8 | |
| Coating | TiAlN | |
| Thread type | G; G-LH | |
| Flank angle | 55 degrees | |
| Tool material | Solid carbide | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 907 mm | |
| Threads per inch | 28 | |
| Nominal ⌀ DC | 795 mm | |
| Flute length Lc | 195 mm | |
| Shank length Ls | 36 mm | |
| Overall length L | 68 mm | |
| Shank ⌀ Ds | 8 mm | |
| No. of teeth Z | 4 | |
| Through-coolant | yes | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| For use with external threads | up to 2×D for bolt threads | |
| Spacing of the cutters | unequal spacing | |
| Feed fz in steel < 750 N/mm2 | 75 mm | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal and external | |
| Thread depth | 195 mm | |
| Type of product | thread milling cutter |
Identification numbers & Classifications
| Article number | 139705 G1/8 | |
| EAN / GTIN | 4045197957696 |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connections). Suitable for internal and external threads.