{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Abrasive flap sleeve (ZA) 80 grit medium 60X30 mm
Article no.: 553822 60X30
Article code:
- Grinding medium code: ZA
Product details
Technical Data
| Grinding media | Zirconium aluminium oxide | |
| Grinding medium code | ZA | |
| Grit | 80 | |
| Grit designation | medium | |
| Sleeve shape | cylindrical | |
| External ⌀ | 75 mm | |
| Sleeve ⌀ | 60 mm | |
| Sleeve width | 30 mm | |
| maximum speed | 9,500 min-1 | |
| Type of product | Flap wheel sleeve |
Identification numbers & Classifications
| Article number | 553822 60X30 | |
| EAN / GTIN | 4045197723192 |
Application Table
Description
Version:
The band holder rubber body expands at high speed to hold the sander band in place. The full width of the band can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with ground sander band holders.
Densely packed around a stable core abrasive strips of Zirconium Aluminium Oxide (ZA) fabric. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold.
Densely packed around a stable core abrasive strips of Zirconium Aluminium Oxide (ZA) fabric. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold.
Application:
Sander bands are predominantly used for sanding down tasks which require the removal of large amounts of material − even at sharp edges.
For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve.
For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve.
Suitable for:
Sander band holder No. 553600.