{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Soft top jaw set, 3 pieces 400
Article no.: 313220 400
Article code:
Product details
Technical Data
| for chuck type | 400 mm | |
| Length L | 180 mm | |
| Width B | 50 mm | |
| Height H | 73 mm | |
| Slot width D | 18 mm | |
| Bore spacing b | 60 mm | |
| Tenon length A | 30 mm | |
| also suitable for chuck type | 500 mm | |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | |
| Type of product | Self-centring chuck jaws |
Identification numbers & Classifications
| Article number | 313220 400 | |
| EAN / GTIN | 2050001929136 | |
| Manufacturer number | 0153104 |
Description
Version:
Unstepped, for boring out to individual clamping ⌀. Precision milled contact face, burnished.
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
Material:
Quality product made of 16MnCr5.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
Aluminium top jaws on request.