{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of welder's safety gloves, Glove size: 9
Article no.: 094116 9
Article code:
Product details
Technical Data
| Manufacturer’s designation | Schweißer-Schutzhandschuh-Paar | |
| Suitable for welding method, welding protection | MIG / MAG welding | |
| Contents pairs | 1 pair | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | 1 | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 2 | |
| Resistance to cuts (TDM) | X | |
| Impact protection | not defined | |
| A: Behaviour when exposed to fire, EN 407 | 4 | |
| B: Contact heat, EN 407 | 1 | |
| C: Convection heat, EN 407 | 3 | |
| D: Radiated heat, EN 407 | X | |
| E: small molten spatters, EN 407 | 4 | |
| F: large molten spatters, EN 407 | X | |
| Type, EN 12477 | type A | |
| Type of leather | split leather | |
| Animal, split leather | cattle | |
| Thickness | 0.8 mm | |
| Material of lining | cotton | |
| EN 407 code | 413X4X | |
| EN 388 code | 4142X | |
| Colour | brown; white | |
| Type of product | gloves | |
| Area of application | welding protection | |
| Glove size | 9 | |
| Accuracy of fit | fitting | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| Standard | EN 12477; EN 388; EN 407 | |
| Backing material | leather | |
| Coating | no coating | |
| Lined | yes | |
| Characteristics | silicone-free | |
| Protection category | III | |
| Overall length | 350 mm | |
| Total weight | 230 g |
Identification & Classification
| Article number | 094116 9 | |
| EAN / GTIN | 4062406129828 | |
| Manufacturer number | 094116 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
GARANT – welder’s glove made from split leather with striking GARANT design. High-quality workmanship with 100% polyester-free seams and an anatomical fit for good touch sensitivity during welding. The inside of the gauntlet is provided with linen fabric for high wearing comfort and sweat absorption. Ideal for MIG/MAG welding.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.