{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
Katalogo Nr.:
Bazinių kumštelių komplektas 3 vnt. skersiniai dantys, Tinka griebtuvams: 160
Prekės Nr.: 313205 160
Prekės numeris:
Produkto detalės
Techniniai duomenys
| Jaw width | 20 mm | |
| Jaw length | 74 mm | |
| For lathe chuck diameter | 160 mm | |
| Clamping face | serrated | |
| Suitable for interchangeable inserts | no | |
| With rib | yes | |
| Tenon width | 8 mm | |
| With groove | yes | |
| Slot width | 18 mm | |
| Function | fixed | |
| Type of fastening | screwing | |
| Hole spacing to one other | 32 mm | |
| Incl. screws | yes | |
| Content | 3 pcs. | |
| Type of product | lathe chuck jaws | |
| Material | steel | |
| Surface | burnished | |
| Content | pieces |
Identifikavimas ir klasifikavimas
| Produkto numeris | 313205 160 | |
| EAN / GTIN | 2050001928948 | |
| Gamintojo numeris | 0157100 | |
| Gamintojas / atsakingas asmuo | SCHUNK SE & Co. KG, Bahnhofstraße 106-134, 74348 Lauffen/Neckar, Germany, www.schunk.com |
Aprašymas
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
To accept hard or soft top jaws. Fastening screws for top jaws are supplied.
To accept hard or soft top jaws. Fastening screws for top jaws are supplied.