{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDLW 09T308 TN, for FeedKing HPC indexable face mills, KU 7710
Article no.: 212964 GGG
Article code:
Product details
Technical Data
| Manufacturer’s designation | XDLW 09T308 TN | |
| Base form | square | |
| Insert width | 7.92 mm | |
| Blade thickness | 9 mm | |
| Insert length | 7.92 mm | |
| Insert version | neutral | |
| Cutting edge height | 3.97 mm | |
| Insert diameter | 9.52 mm | |
| Corner radius | 0.8 mm | |
| Corner chamfer length | 2.06 mm | |
| Corner chamfer angle | 9 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 9 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | XDLW 09T308 TN | |
| Machining group | H (hard materials); K (cast iron); S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | KU7710 | |
| Coating | uncoated | |
| Grade | KU7710 | |
| Insert thickness | 9 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XDLW 09T308 TN | |
| Interface coding for insert according to ISO TS 13399-60 | XD09T3083N | |
| Insert designation | XDLW 09T308 TN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); hardened steel (H); heat-resistant super-alloys (S) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Number of potential uses | 4 pcs. | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212964 GGG | |
| EAN / GTIN | 4045197720573 | |
| Manufacturer number | 212964 GGG | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
600
Description
Note:
Do not tighten insert screw No. 219933 to more than 2.2 Nm!
Standard application values for ae = 0.5 … 1×D / ap max
Standard application values for ae = 0.5 … 1×D / ap max