{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Wet film separating agent containing silicone SR Food, Contents: 500ml
Article no.: 083092 500
Article code:
- Labelling of hazardous substances: GHS02: Flame; GHS07 caution; GHS09 harmful to the environment
Product details
Technical Data
| Version | Spray can | |
| Spray head | Standard | |
| Contents | 0.5 l | |
| Colour | transparent | |
| Boiling point | 55 °C | |
| Flashpoint | -26 °C | |
| Solubility in water | insoluble | |
| Operating temperature range | 200 °C | |
| Labelling of hazardous substances | GHS02: Flame; GHS07 caution; GHS09 harmful to the environment | |
| Type of product | Silicone spray |
Identification & Classification
| Article number | 083092 500 | |
| EAN / GTIN | 5412386065637 | |
| Manufacturer number | 32956-AA | |
| Manufacturer | CRC Industries Deutschland GmbH, Südring 9, 76473 IFFEZHEIM, Germany, www.crcind.com |
Description
Version:
Silicone-based separating agent, foodstuffs certified. Outstanding separating performance on thermoset resins and thermoplastics, and also on many types of rubber. Suitable for use on packaging materials with foodstuffs contact.
- Silicone-based separating agent with NSF M1 approval.
- Operating temperature range up to 200°C.
- Ensures a high gloss on transparent plastics.
- Outstanding anti-friction effect for uncomplicated release of lightweight moulded parts from the mould.
Application:
To assist the release of plastic and rubber moulded parts from the injection mould, especially for packaging materials for the foodstuffs industry. To act as an anti-friction and separating agent in the field of foodstuffs technology.
- Apply a thin even film to the clean dry mould at a distance of 25 – 30 cm.
- Wait a short time until the solvent has evaporated.
- If necessary, repeat the procedure after some time.
- Refer to the current safety data sheet (SDB) for safety instructions.
Note:
Contains silicone, which achieves a high and sustained separation effect. On some cases this may have a negative effect on the moulded parts regarding adhesion of paints, coating or adhesives.