{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
HiRunER precision ER collet chuck SK 40 A = 70
Article no.: 300642
Article code:
Click to enlarge image
Click to enlarge image
Collets are not inserted 100 % into standard ER chucks.
Click to enlarge image
HiRunER collets are inserted fully into the chuck, resulting in better retention forces and better concentricity.
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Arbor standard: ISO 7388-1
- Shape: ADB
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
- Concentricity: ≤ 3
- Machining strategy: HSC; HPC
Description
Version:
External and internal tapers are ground. All shanks are hard turned for smooth running. Including RFID/Balluffchip bore, high-performance clamping nut up to 25000 rpm.
Advantage:
- 3 µm radial run-out with a 2 µm clamping nut, 6 µm radial run-out with a 5 µm clamping nut.
- Extremely strong holding force (up to factor 2better than the standard ER chuck).
- Vibration reduction effect due to 2-part clamping nut (size 11M and 16M 1-piece).
Application:
For clamping tools with plain shank in collets to DIN 6499 - Form A and B.
Supplied with:
Precision clamping nut.
Optional extras:
Pull studs (PS) No. 308600 – 308806, PS wrenches No. 308820 – 308835, ER chuck keys No. 309757, 309758 (for 11M and 16M); Fahrion ER collets No. 308901 − 309434. ER collets No. 308901 − 309432, hook spanner No. 628400 or torque wrench No. 309749 or 628520.
Note:
- Clamps only nominal ⌀ up to shank ⌀ tolerance h 10.
- Do not use the clamping nut in combination with a sealing washer.
- Use in combination with Fahrion collets.
- The blue design ring must be removed for Fahrion HP 2μm ER collets.
Use the precision collet chuck always in conjunction with the precision clamping nut No. 309617.