{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNMG 150604, Grade: PV720
Article no.: 250796 PV720
Article code:
Product details
Technical Data
| ISO code indexable insert | DNMG 150604 | |
| Corner radius | 0.4 mm | |
| Grade | PV720 | |
| Tool material | Cermet | |
| Main application | P | |
| Cutting conditions | continuous | |
| Chip breaker | PG | |
| Cutting depth ap | 1 mm - 4 mm | |
| Feed f | 0.15 mm/rev. - 0.6 mm/rev. | |
| Cutting speed vc main application | 110 m/min - 490 m/min | |
| Number of changes/inserts | 4 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 250796 PV720 | |
| EAN / GTIN | 4960664724604 | |
| Manufacturer number | TLD03980 |
Application Table
P
P
P
P
P
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
DNMG 150604, Grade: PV720 |
|||||
| Number of changes/inserts | 4 | 4 | 4 | 4 | 4 |
| Corner radius | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm | 0.4 mm |
| Cutting conditions | continuous | slightly interrupted | continuous | heavily interrupted | slightly interrupted |
| Cutting depth ap | 1 mm - 4 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.5 mm - 5 mm | 0.8 mm - 5 mm |
| Chip breaker | PG | SM | SM | SM | PM |
| Cutting speed vc main application | 110 m/min - 490 m/min | 120 m/min - 350 m/min | 120 m/min - 440 m/min | 100 m/min - 320 m/min | 100 m/min - 280 m/min |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |