This article is no longer part of the assortment. If you are looking for an alternative, please note the links or get in contact with us.

Alternative article:

Machine tap HSS-E-PM G3/4

Article no.: 137410 G3/4

Thread size		G3/4
Coating		TiCN
Thread type		G
Flank angle		55 degrees
Tool material		HSS E PM
Standard		DIN 5156
Taper lead form		C
Helix angle		40 degrees
Shank		Plain shank with h9
Through-coolant		no
Application for type of drilling		up to 2×D for blind holes
Cutting direction		right-hand
Thread pitch		1.814 mm
Threads per inch		14
Thread ⌀		26.44 mm
Overall length L		140 mm
Shank ⌀ D_s		20 mm
Shank square □		16 mm
Tapping hole ⌀		24.5 mm
Type of threading tool		Machine tap for dynamic machining
Number of clamping slots		4
Colour ring		red
Number of cutting edges Z		4
Thread depth		52.88 mm
Type of product		Tap

Article number		137410 G3/4

For use with emulsion (fat content minimum 8%).

For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).

For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3 mm larger.