{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Electronic torque screwdriver tester “TST” 10 N·m
Article no.: 654300 10
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Optional accessories: Calibration device for TST, TTT in conjunction with sensors FMT up to 1500 Nm.
Click to enlarge image
- Direction of tightening: Right-hand tightening
- Interface: RS232C interface
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 10 Nm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±0.5 % | |
| Interface | RS232C interface | |
| Test certificate | Manufacturer’s test certificate | |
| Measuring range | 0.5 Nm - 10 Nm | |
| Display unit width | 288 mm | |
| Display unit height | 72 mm | |
| Display unit depth | 160 mm | |
| Weight | 2.2 kg | |
| Power supply | Battery-powered | |
| Number of batteries contained | 2 | |
| Article no of the battery / rechargeable battery fitted | 081560 CR2032 | |
| Type of product | Torque testing device |
Identification numbers & Classifications
| Article number | 654300 10 | |
| EAN / GTIN | 2050001016935 | |
| Manufacturer number | 43213/TST10 |
Description
Version:
- Robust polyurethane body for table mounting or wall hanging.
- Large-format LCD display.
- Direct choice from the test procedure pictogram keypad for
- Interface for connection to an external sensor. When using sensors No. 654350 the measurement range and the calibration parameters are recognised automatically.
- Frequency displays for checking pulsed tools or screwdrivers with slip couplings.
- Target torque values with upper and lower tolerance limits can be programmed.
- Serial interface for connection to a printer or PC.
- Power supply: Integral rechargeable battery for approx. 16 hours free-standing use, or 230V mains operation.
- TCS calibration software (available free of charge after registration at www.norbar.com/en-gb/downloads/torque-certification-system).
Integral sensor with 1/4 inch hexagon C 6.3 and additional connection for 1 external sensor.
Advantage:
Flexible measuring system can be extended to 100,000 Nm. Very easy to use.
Application:
Calibrating torque screwdrivers with adjustment scale or display. Setting and calibrating torque screwdrivers without scale. Setting and calibrating electric or pneumatic screwdrivers with automatic shut-off. Use optional external measurement transducers to calibrate torque wrenches or torque screwdrivers up to 100,000 Nm.
Supplied with:
Supplied with UKAS calibration certificate, right-hand and screw tightening simulator for calibrating electric or pneumatic screwdrivers, 2 fastening screws, serial data transmission cable in a plastic case.