{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Reamax® TS reaming head H7 ASG4000 DST 18 mm
Article no.: 239816 18
Article code:
- Hole tolerance: H7
- Application for type of drilling: for through holes
- Through-coolant: yes
Find similar products here:
Product details
Technical Data
| Nominal ⌀ D | 18 mm | |
| Coating | DST | |
| Hole tolerance | H7 | |
| Application for type of drilling | for through holes | |
| Through-coolant | yes | |
| for holders No. 239880 − 239940 | 18 − 19,99 | |
| Cutter length l1 | 6 mm | |
| Head length l | 20 mm | |
| Number of cutting edges Z | 6 | |
| Feed f in steel < 750 N/mm2 | 0,8 mm/rev. | |
| Type of product | Cutter insert for reaming |
Identification & Classification
| Article number | 239816 18 | |
| EAN / GTIN | 4047109236547 | |
| Manufacturer number | 75J.93.18H7D | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 BESIGHEIM, Deutschland, www.kometgroup.com |
Application Table
P
180
P
160
P
140
Description
Version:
Reaming heads finish ground for fit H7.
Cutter geometry matched to the application. Adjustable down to the µm range for wear compensation and for very tight basic tolerances down to IT4. For use in through holes up to 5×D.
In geometry ASG4000 straight cut with lead angle 25°.
Especially for through holes in steel.
Cutter geometry matched to the application. Adjustable down to the µm range for wear compensation and for very tight basic tolerances down to IT4. For use in through holes up to 5×D.
In geometry ASG4000 straight cut with lead angle 25°.
Especially for through holes in steel.