{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
CNC auxiliary cabinet with drawers 26×20G
Article no.: 970755
Article code:
Click to enlarge image
Installation in the right-hand half of the cabinet.Drawers and pull-out shelves can also be installed in the left-hand half of the cabinet.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Drawer/pull-out shelf load capacity: 200
- Drawer runner extension (partial/full extension): 100
- Height adjustment interval: 25
- Cylinder lock: modular lock barrel
- Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
Description
Version:
Tool auxiliary cabinet in 60×28G, with drawers 26×20G. With sliding doors, centrally lockable by slide handle with cylinder lock, raised edge on 3-sides and ribbed rubber mat. No anti-tilt device.Drawers and pull-out shelves can be installed in both cabinet halves, without a centre partition. 100% full extension drawers with differential runners. Load capacity for drawers and pull-out shelves 200 kg. Drawers with slots at 25 mm intervals to take slotted dividers.
Colour:
Body, pull-out shelves and drawer cabinet body RAL 7035 light grey, doors and drawer fronts RAL 7016 anthracite powder-coated. Drawer body not configurable, always RAL 7035 light grey.
Note:
For storage of tools, a drawer inlay No. 970708 is required.