Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 071120

      Baton offset screwdriver with parameter control 14.4V 711250

      Brand: Fein
      suitable battery - supplier / battery type / voltage Fein type E 14 V
      No price available

      Baton offset screwdriver with parameter control 14.4V 711250

      Subsequent delivery



      FEIN ACCU TEC shut-off screwdrivers are designed for the most demanding applications requiring precise screw tightening in series production.
      • Brushless EC motors with working life extended by a factor of several times and up to 80 % lower maintenance costs.
      • Restart delay after the screw tightening, to avoid “follow-up”.
      • Restart inhibit if the remaining battery charge is insufficient to perform the screw tightening.
      • Tight screw tightening tolerances for high screw tightening quality.
      • Precise and consistent tightening torques in any screw tightening application.
      • Testable screwdrivers, CmK-value > 2.0 at ±10% (based on 6 sigma) according to ISO 5393 VDI/VDE 2647.
      • Guaranteed compatibility: Cordless tool can be operated with all FEIN Li-ion batteries (12-18V) due to multi-volt interface.

      The release torque is 25 % above the tightening torque.
      Torque shut-off screwdriver with ParameterControl for easy and individual programming on a PC , using the programming adaptor (No. 071135 size 92604163).
      Freely programmable parameters: Speed, direction of rotation, angle of rotation, torque threshold and time.
      Up to 5 programmable steps. Precise configuration for each screw tightening application. Final switch-off by mechanical clutch. Ideal for optimising the process and time.
      Shut-off screwdriver, takes a Li-ion battery. Maintenance-free up to 500,000 screw fastenings.

      Supplied with:

      Just the screwdriver itself is supplied, without battery, charger or setting tool and angle head. Please order the battery, charger, setting tool and angle head specifically for the device.


      See no. 654300 ff. for
      torque analysers; see no. 654381 for torque sensors/rotational angle sensors.
      Calibration service on request.