Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 297155

      Thread turning tool right-hand similar to DIN 282 (ISO 12) P20 12 mm HOLEX

      Brand: HOLEX
      No price available

      Thread turning tool right-hand similar to DIN 282 (ISO 12) P20 12 mm...

      Subsequent delivery

      Description

      Version:

      Carbide − steel shanks with 700 - 800 N/mm2 strength and flat chamfered mounting surface. Fitted with diamond ground carbide inserts. Angles on the inserts are precision ground. All turning tools are supplied with sharp cutting edges. Sharpening the cutting edge with a boron carbide hand lapper will increase the tool edge life. The extent of the wear area is dependent on the cutting conditions. For roughing and interrupted machining it is imperative that the cutting edges are sharpened.
      Fitted with diamond ground carbide inserts.

      Application:

      P20/K25 for machining steel and cast iron.
      M20 for machining stainless steels.

      Attention:

      For rough and interrupted machining the cutting edges should be sharpened with a boron carbide hand lapper No. 558400 or 558420.