45° indexable end mill Weldon shank 25/4 mm GARANT
Article no.:
214395 25/4
- Setting angle κ: 45 °
- Milling application: Circular milling
- Milling application: Ramping
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Weldon shank | |
| Setting angle κ | 45 ° | |
| Milling application | Circular milling; Ramping | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum external ⌀ Dmax | 33,2 mm | |
| Overhang L1 | 44 mm | |
| Overall length Ltot | 100 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| suitable indexable insert | SD... 0903 | |
| ⌀ D3 | 33 mm | |
| Circular interpolation milling ⌀ Dmin | 58 mm | |
| Circular interpolation milling ⌀ Dmax | 64 mm | |
| Circular interpolation milling ap | 1,5 mm | |
| Ramping angle αmax | 1,27 mm | |
| Ramping length L for αmax | 22,5 mm | |
| Pack of insert screws | 219809 (8IP; 1.5 Nm) | |
| Type of product | Face mill | |
| Article number | 214395 25/4 | |
| EAN / GTIN | 4045197221643 |
Description
Version:
High number of cutting edges for very high productivity. Positive rake for soft cut and low power consumption.
Advantage:
Very high productivity due to:
- Very high cutting speeds.
- Very high feed rates.
- Short machining times.