Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 563575

      Cutting disc THIN 115 mm HOLEX

      Brand: HOLEX
      maximum circumferential speed 80
      recommended approach angle 90
      Grinding medium code A
      Iron, sulphur and chlorine constituents < 0.1
      optimised for material INOX
      No price available

      Cutting disc THIN 115 mm HOLEX

      Subsequent delivery

      Description

      Version:

      Narrow version for fast economic cutting.
      • Grit, bonding, abrasive additives as well as reinforcement of the cut-off discs are optimised for maximum cutting performance and working life in their respective applications.
      • Thin cutting discs (0.8 mm / 1.0 mm / 1.6 mm) specially suited for quick burr-free cutting with low thermal stress. On older angle grinders please ensure discs are precisely centred! Cutting discs from 2.0 mm disc thickness exhibit increased lateral stability, stiffness and service life.
      • Shapes: Cutting discs flat (shape 41) or with depressed centre (shape 42).

      Application:

      For freehand cutting using electric and pneumatic angle grinders with maximum 80 m/s peripheral cutting speed vc.

      Specification:

      A60P-BF.

      Note:

      The disc thickness should be at least 20% of the material thickness to be cut. For stainless steel, use cutting discs at reduced speed.

      Application Table

      Alu Mg
       
      Steel < 900 N/mm²
       
      Steel < 1400 N/mm²
       
      Steel < 55 HRC
       
      Steel < 60 HRC
       
      Steel < 67 HRC
       
      INOX
       
      Ti
       
      GG(G)
       
      CuZn
       
      Plastic, GRP
       
      dry