{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Electronic torque screwdriver analyser &TST& 2 Nm
Article no.: 654300
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Optional accessories: Calibration device for TST, TTT in conjunction with sensors FMT up to 1500 Nm.
Click to enlarge image
- Direction of tightening: Right-hand tightening
- Interface: RS232C interface
- Test certificate: Manufacturer’s test certificate
Description
Version:
- Robust polyurethane body for table mounting or wall hanging.
- Large-format LCD display.
- Direct choice from the test procedure pictogram keypad for
- Interface for connection to an external sensor. When using sensors No. 654350 the measurement range and the calibration parameters are recognised automatically.
- Frequency displays for checking pulsed tools or screwdrivers with slip couplings.
- Target torque values with upper and lower tolerance limits can be programmed.
- Serial interface for connection to a printer or PC.
- Power supply: Integral rechargeable battery for approx. 16 hours free-standing use, or 230V mains operation.
- TCS calibration software (available free of charge after registration at www.norbar.com/en-gb/downloads/torque-certification-system).
Integral sensor with 1/4 inch hexagon C 6.3 and additional connection for 1 external sensor.
Advantage:
Flexible measuring system can be extended to 100,000 Nm. Very easy to use.
Application:
Calibrating torque screwdrivers with adjustment scale or display. Setting and calibrating torque screwdrivers without scale. Setting and calibrating electric or pneumatic screwdrivers with automatic shut-off. Use optional external measurement transducers to calibrate torque wrenches or torque screwdrivers up to 100,000 Nm.
Supplied with:
Supplied with UKAS calibration certificate, right-hand and screw tightening simulator for calibrating electric or pneumatic screwdrivers, 2 fastening screws, serial data transmission cable in a plastic case.