Pull stud, 18CrNiMo7, sealed, Form B without bore 50 GARANT
Article no.: 308615 50
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 50 | |
| Hole characteristics | without bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 36 mm | |
| Head ⌀ D1 | 28 mm | |
| Overall length L | 74 mm | |
| L1 | 34 mm | |
| Thread M | M24 | |
| maximum tightening torque | 150 N·m | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 30 mm | |
| Type of product | Pull Stud | |
| Article number | 308615 50 | |
| EAN / GTIN | 4045197554550 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.