Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 310500

      Three-jaw lathe chuck recessed mount Steel 80 mm

      Brand: Röhm
      No price available

      Three-jaw lathe chuck recessed mount Steel 80 mm

      Subsequent delivery

      Description

      Version:

      • Manual chucks with gear scroll, centrically clamping.
      • Body made of cast iron or steel.
      • Gear scroll drop-forged, balanced, and hardened.
      • Flanks of scroll and of jaw serrations are ground.
      • High concentricity to DIN 6386, Part 1.

      Application:

      For spindle noses with thread to DIN 800. The chuck is fitted to a flange from the rear by means of screws and this flange is then mounted on to the lathe spindle. The flange blanks must always be fitted first to the machine and then to the chuck.

      Standard:

      DIN 6350 − Form A − Cushman system.

      Supplied with:

      1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard outside jaws, stepped on the inside.
      1 clamping wrench and fastening screws or studs depending on the chuck.

      Optional extras:

      For spare and additional jaws see No. 314000 − 315200. For swarf protection see No. 312800.

      Note:

      DIN6350 satisfies the international standard ISO702-4.
      For self-centring three-jaw lathe chucks see No. 313110 - 313140.