{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ESD support leg incl. manual height adjustment, Number of pull-out frames: 800mm
Article no.: 972185 800
Article code:
- Design version: Steel hollow section construction
- electrostatic characteristic: EGB/ESD
Find similar products here:
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Material thickness | 1,5 mm | |
| electrostatic characteristic | EGB/ESD | |
| Height adjustment range | 800 mm - 950 mm | |
| Width | 50 mm | |
| Depth | 700 mm | |
| suitable for worktop depth | 750 mm | |
| Type of product | Support leg |
Identification numbers & Classifications
| Article number | 972185 800 | |
| Manufacturer number | 972185 800 |
Description
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Height adjustment 150 mm.
Height adjustment 150 mm.
Colour:
Standard light grey paint finish similar to RAL 7035 ESD powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 972195 for stiffening. The height is to the underside of the worktop.
All plastic components are not ESD conductive. The support legs cannot be used for earthing.
All plastic components are not ESD conductive. The support legs cannot be used for earthing.