{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Double taper clamping jaw flat, Thread M: M12
Article no.: 370024 M12
Article code:
Find similar products here:
Product details
Technical Data
| Thread M | M12 | |
| Length | 42 mm - 49 mm | |
| Height H | 26 mm | |
| B1 | 41 mm | |
| maximum tightening torque | 85 Nm | |
| Clamping force | 50 kN | |
| Type of product | Wedge clamp |
Identification numbers & Classifications
| Article number | 370024 M12 | |
| Manufacturer number | 23250.0142 |
Description
Application:
Turning the clamping screw movers the two clamping jaws outwards and presses the workpieces against a fixed stop.
The double wedge allows the additional facility of vertical clamping.
The double wedge allows the additional facility of vertical clamping.
Material:
Base of tool steel, hardened, bright finish. Base of tool steel, hardened, burnished and ground.
Note:
Installation in a tapped hole or using a nut on T-slots. Horizontal or vertical multiple clamping can be performed.